What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
11.06.2025 03:21

The bolt then partially travels down the line to your home.
These are simplified answers to the original question, and does not change anything I wrote above.
One is “what exactly is in a ‘surge protector’ ? ”
New COVID-19 variant detected in Washington state. Here’s what to know - The Seattle Times
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
In schematic diagrams this is the symbol for a fuse:
eight
For this case there are devices called Metal oxide varistors (MOV).
So, the voltage could go up to 500 volts, and the fuse will not open up.
This is where the MOV conducts again, and dissipated the energy.
Is Trump the greatest spiritual leader since Jesus?
He then describes Rainy Season and Lightning.
Upvotes:
This is 'the assistant's answer'
Turning the Red Planet green? It's time to take terraforming Mars seriously, scientists say - Space
so, what happens?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
2024–10–10[John johnson John Johnson ]
The ‘inexcusable’ mistake Knicks made again and again in season-ending loss - New York Post
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
This is where this question deviates from being a 'generic' question, and becomes more specific.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Midlife Caffeine Intake Linked to Healthy Aging - Neuroscience News
Here is a simplified AC power diagram.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
At one ohm, the resistor has a maximum of 1 watt power.
Chrysler Is 100 Years Old, and It's 'Back On,' Stellantis Design Boss Gilles Says - Road & Track
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
2024–10–16 [ OO OLAOYE OYEBODE ]
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Wicked: For Good trailer transports fans back to Oz - BBC
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Nintendo Switch 2 doubles FPS of Switch 1’s “worst” performing games - Dexerto
[image of Common-mode choke]
Barnstars:
A fuse is a non-resetable over current circuit protector.
(Dc diagram shown, AC is similar).
This device then solves the entire problem.
What does a fuse do?
but this device (an Inductor) … impedes the rapid changes in the current.
[old diagram got deleted by accident]
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
First Sentence:
what exactly is a ‘surge’ protector?
The MOV will conduct when the voltage exceeds 50% of line voltage.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
One
The other is “what does a “fuse” do?”
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
A circuit breaker is similar, but is resettable.
the problem then depends on "how fast does the fuse operate?".
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
This one hit behind the barn.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Because the load is inductive, the current lags the voltage.(by a bit).
But… the neutral is now “floating” because of the 1 ohm resistance.
but I think this circuit , shows a few more pieces.
These devices are installed between the “hot” and “neutral” and protective ground.
2024–10–14 [Omar Gharbi Omar Gharbi ]
He then describes the function of a fuse.
But it can get overloaded, and no longer works.
a photo is worth a thousand words.
It also is a device that limits the change in current flow.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
He then asserts :
There are two important concepts here.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
At least they know the answer if they wanted it.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
The third is lightning and “how it gets conducted into a home.”
Now when you have a certain ac resistance, then a current flows in a loop.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
An AC voltage/ current source, and an ac inductive load.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
It seems Mohan does not understand the difference between a comment and an Answer.
What is lightning?
There are three different concepts here that are getting confused.
nine
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
I post the exact comment here.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Edit 2024–10.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.